Vijayanta - Roorkee(uttarakhand)

Home | About | FAQ | Contact

PRODUCTS
General Test & Measuring Instruments
Power Electronics & Drives Lab
Control & Instrumentation
Physics Lab Trainer
Power Supplies
Active & Passive Filters
Digital Electronics Lab , Theorems & A.C. Bridges
Electronics Lab Trainer
Electromagnets
Oscillators
Communication / Fiber Optics Trainer
Micro Processor Trainers
Data Logger
Rheostats for Educational Purpose
Squirrel Cage Induction Motor, Flange Mounted
ELECTRICAL MACHINE
POWER QUALITY ANALYZER
CIVIL ENGINEERING EQUIPMENTS
Viscosity Apparatus For School Laboratory
Laser Ranges
LAB EQUIPMENT

01332 - 272509 , 276608
+91 7579200827
info@vijayantatechnologies.com

© Vijayanta. All rights reserved | Developed by Divine Softtech

Electronics Lab Trainer

Study of Power supply, (Solid State) Model – SPS – 12.

Study of Multivibrators (using Transistors),Model – MV– 12.

Study of Hybrid– Parameters of a Transistor, Model – H – 01.

Measurement H, Y & Z parameter of junction transistor in CE mode at different emitter Current value, Model – H – 02

Study of Basic Operational Amplifier, Model – LM – 741.

Study of Op – Amp. Math–Circuits, Model – 741 M.(using Op-Amp. as Summer, Substractor, Integrator, Differential)

Study of Comparator and Schmitt Trigger Using Op – Amp., Model – CST – 10

Study of Precision Rectifier Using Op-Amp., Model – PR – 10.

Study Of Voltage Controlled Oscillator Using I.C. – Ne - 566, Model – VCO – 10

Study of an Integrated circuit timer, Model – 555.

Study of astable and monostable multivibrator using I.C. – 555, Model – AM – 555.

Study of an integrated circuit regulator, Model – 723.

Study of a transistor amplifier (RC Coupled) Cum-Feed-Back Amplifier, Model – RC – 10

Performance study of two stage amplifier with RC, LC and Transformer coupling, Model – CT–12.

Study of Single Stage Transistor Amplifier in CE Mode, Model – CE - 10.

Study of single stage Transistor Amplifier in Common Base Mode, Model – CB– 12.

Study of load variation and frequency response of single stage CE amplifier, Model – LF – 04.

Performance Study Of Chopper Amplifier, Model – CA – 10.

Study of Instrumentation Amplifier using Op – Amp., Model – IA – 12

Transistorized Emitter Follower / Darlington Pair Amplifier, Model – FD – 10.

Performance study of a class A, AB and B Push – pull, Model - PP – 10

Different types of characteristics of junction (NPN transistor) transistor in CE, CB and CE configuration, Model – JT – 10.

Different types of characteristics of junction (PNP transistor) transistor in CE, CB and CE configuration, Model – JT – 11.

Different types of characteristics of junction (NPN & PNP) transistor in CE, CB and CE configuration, Model – JT – 12.

Study of Characteristics of Semiconductor Diode : Si, Ge, Zener and LED, Model – SD – 12.

Study of Semiconductor Diode Voltmeter, (Study of semiconductor diode voltmeter use as average responding ac voltmeter) Model – SDV – 10.

Characteristics of P.N. Junction Diode (Ge & Si) and Comparison, Model – D – 01.

Characteristics of Zener Diode and Zener Regulator, Model - Z – 10.

Study of Logarithmic Amplifier Using Op – Amp., Model – LA – 10

Characteristics of Unijunction Transistor (UJT) and Measurement of Its Parameters, Model – UJ – 05.

Characteristics of Field Effect Transistor (FET) measurement of its Parameters, Model – FT – 10

Study of voltage to Frequency Conversion, Model – VF – 12.

Study of voltage to Current Conversion, Model – VC – 12.

Study of Op – Amp. Math–Circuits, Model – 741 M.(using Op-Amp. as Summer, Substractor, Integrator, Differential)

Features :

This experimental board is designed to study of few math validation (as a Summer, Subtractor, Integrator and Differentiator) using an Operational Amplifier – mA.
Builtin Regulated and Short circuit proof ± 12 Volt DC Power Supply suitable to the operational board and Op – amp.
Circuit is engraved and necessary network of Resistance and Capacitor are mounted on the top of the decorated bakelite sheet to facilitate better and clear understanding.
A complete working manual containing theory, circuit details and operating instruction provided.
Stackable type connecting leads suitable to the terminals are supplied with the board for easy inter – connections and longer working life of the terminals.
The board has builtin is symmetrical ± 2, Volt (Variable) and + 2 Volt (Constant) D.C. Power Supply as a voltage source for experimental purpose.
One D.P.M. is also provided with the board for measuring output voltages.
Weight : 2.5 Kg Approximately
Dimension : 280mm × 210mm × 82mm

Experiments :

Study of Op – Amp. as :

Summer.
Subtractor,
Integrator.
Differentiator.
Frequency Response

Other Apparatus Required :

A General purpose Dual Trace C.R.O.
Function Generator.

Note: There may be any change in specification due to continuous R & D without notice.

Click below to view catalogue